use: Dust suction and drain hoses Suction and drain hoses for wear-resistant, wear-resistant, water-repellent, for vacuum or gravel trucks, sand, gravel, cement powder, dry fertilizers, iron ore and abrasives for processing from grains. Note. This hose is not designed for batch processing, for example, for the removal of railway transport. Litho Hydraulics is designed specifically
High Pressure Hydraulic Hose, 1SN, 2SN, 4SP, 4SH, R13 and …
We can supply standard high pressure hydraulic hose including high-pressure hose EN 853 1SN, 2SN, 4SP, 4SH, SAE 100R13 and R15. They are used as flexible hoses in the hydraulic systems of machines and mechanisms for the transportation of mineral and hydraulic oil, fuel oil and water-oil emulsions.
EN 856 4SP Steel Wire Spiraled Hydraulic Hose
EN 856 4SP steel wire spiraled hydraulic hose with four layers of reinforcement. EN 856 4SP steel wire spiraled hydraulic hose. EN 856 4SP steel wire spiraled hydraulic hoses in row.
EN 856 4SH/4SP wire spiral hydraulic rubber hose
Your Position：HOME > Product Center > EN 856 4SP/4SH > EN 856 4SH/4SP wire spiral hydraulic rubber hose EN 856 4SH/4SP hydraulic hose has higher working pressure.
EN 856 4SP -
EN 856 4SP. KEY PERFORMANCE. EN/DIN and new SAE rated working pressures. Approved at 1.000.000 impulse cycles Over standard pressure resistance biological and mineral oils compatibility.
4SP EN 856 - Industrial Rubber Hose Manufacturer
Liner. Oil resistant synthetic rubber. Reinforcement. Four spirals of high tensile steel wire. Application. High pressure hydraulic lines. Hydraulics Oils
DS-4SP - Diesse Rubber Hoses S.p.A.
Very high pressure hose for severe hydraulic pulsing applications. Suitable for passage of mineral and vegetable oils, water-based solutions, water air and inert gases.
EN 856 4SH 4-Wire Hydraulic Hose
EN 856 4SH Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Ideal for high-impulse applications No skiving required with W Series Bite-To-The-Wire Hose Fittings (sizes -12 through -24)
Hydraulic Hose: DIN 20023 4SP/EN 856 4SP, DIN 20023 4SH/EN …
This hose consists of an inner tube of oil-resistant synthetic rubber, four-spiral wire reinforcement, and an oil- and weather-resistant synthetic rubber cover. APPLICATIONS: Hose range suitable to carry hydraulic fluids, such as glycol, mineral oils, emulsion, hydrocarbons, etc.
DIN EN 856 4SP Hydraulic Hose -
Application: Very high pressure applications used for petroleum based hydraulic fluids. Construction: This hose consist of an inner tube of oil resitant synthetic rubber …
4SP Hydraulic Hose - Hydraulic Hose | Hydraulic Megastore
Description 4SP Hydraulic Hose. Internal Hose: Synthetic rubber, extruded whole without joints, of uniform thickness Reinforcement: 4 steel wire braids External Covering: Synthetic rubber, resistant to oils, fuels and atmospheric conditions Operating Temperature Range: -40°C to +100°C Price shown is per metre of hose. This hydraulic hose is one of any hoses that the Hydraulic Megastore has
High-Pressure ParLock Multispiral Hoses ISO 3862 - DIN EN
Parker's ParLock Multispiral Hoses H31, H31TC and H31ST are developed with the ParLock Interlock technology and for a working pressure of up to 50,0 MPa. This hose range offer an excellent solution for extremely dynamic pressure applications.
FC254 Four Heavy Spiral Wire Hydraulic Hose
Aeroquip FC254 Four Heavy Spiral Wire: Check up to five results to perform an action. Construction Synthetic rubber tube, 4-heavy spiral wire reinforcement and DURA-TUFF™ synthetic rubber cover.
Hydraulic Hose | EN 856-4SP | Pipestock
China High Pressure Pipe En 856 4sp - China Spiral
Spiral Hydraulic Hose, Pressure Pipe, Pressure Hose manufacturer / supplier in China, offering High Pressure Pipe En 856 4sp, 90 Degree Elbow Metric Hydraulic End Fitting, 20 Bar Air Tubing and so on.